3Com® Switch 5500G Open Services Networking Configuration and Command reference Guide

34 Chapter 5: ACFP Configuration Commands
Description Use the display acfp client-info command to display the information
about the specified ACFP client(s).
n
■ If the ACFP client ID is specified, the information about the specified
ACFP client is displayed.
■ If no ACFP client ID is specified, the information about all the ACFP
clients is displayed.
Examples # Display the information about all the ACFP clients.
<SW5500G> display acfp client-info
ACFP client total number: 1
ClientID: 1
Description: IDS
Hw-Info: 1.0
OS-Info: Fedora release 6.0 (Zod)
App-Info: 2.0
Client IP: 1.1.1.1
Client Mode: ipserver redirect mirror
Table 1 Description of the display acfp client-info command fields
Field Description
ACFP client total number Total number of ACFP clients
ClientID Index of the client list
Description Description information of the
client application program
Hw-Info Hardware information of the
client
OS-Info Operating system information
of the client
App-Info Application software
information of the client
Client IP Client IP address
Client Mode Working mode supported on
the client:
■ ipserver: host mode
■ redirect: redirect mode
■ mirror: mirror mode