3Com® Switch 5500G Open Services Networking Configuration and Command reference Guide

35
display acfp policy-info
Syntax display acfp policy-info [ client client-id [ policy-index ] |
dest-interface interface-type interface-number | in-interface
interface-type interface-number ] [ active | inactive ]
View Any view
Parameters client client-id: Displays the policy sent by the specified ACFP client,
where client-id is the ACFP client ID, in the range of 1 to 2147483647.
policy-index: Policy index, in the range of 1 to 2147483647.
dest-interface interface-type interface-number: Displays all the policies
that use the specified port (destination port) for connecting to the ACFP
client, where interface-type interface-number is the port type and port
number.
in-interface interface-type interface-number: Displays all the policies
that use the specified port as the inbound port, where interface-type
interface-number is the port type and port number.
active: Displays active policies only.
inactive: Displays inactive policies only.
Description Use the display acfp policy-info command to display the ACFP policy
information.
n
■ When you use this command to display the policy information sent by
the specified ACFP client, if you specify the policy-index argument, the
command displays the information about the policy whose number is
the policy-index applied by the ACFP client with an ID of client-id.
Otherwise, the command displays the information about all the
policies sent by the ACFP client with an ID of client-id.
■ If neither the active nor inactive keyword is specified, the command
displays all the active and inactive policies.
■ If no argument is specified, the command displays the information
about all the policies.