3Com® Switch 5500G Open Services Networking Configuration and Command reference Guide

42 Chapter 6: ACSEI Server Configuration Commands
Description Use the acsei client reboot command to restart the specified ACSEI
client.
Note that after you restart an ACSEI client using the acsei client reboot
command, the OSN|M where the ACSEI client is integrated is restarted.
Examples # Restart ACSEI client 1.
<SW5500G> system-view
System View: return to User View with Ctrl+Z.
[SW5500G] acsei server
[SW5500G-acsei-server] acsei client reboot 1
acsei server
Syntax acsei server
View System view
Parameters None
Description Use the acsei server command to enter ACSEI server view.
Examples # Enter ACSEI server view.
<SW5500G> system-view
System View: return to User View with Ctrl+Z.
[SW5500G] acsei server
[SW5500G-acsei-server]
acsei server enable
Syntax acsei server enable
undo acsei server enable
View System view
Parameters None