3Com® Switch 5500G Open Services Networking Configuration and Command reference Guide

43
Description Use the acsei server enable command to enable the ACSEI server.
Use the undo acsei server enable command to disable the ACSEI
server.
By default, the ACSEI server is disabled.
Examples # Enable ACSEI server.
<SW5500G> system-view
System View: return to User View with Ctrl+Z.
[SW5500G] acsei server enable
acsei timer clock-sync
Syntax acsei timer clock-sync minutes
undo acsei timer clock-sync
View ACSEI server view
Parameters minutes: Value of the synchronization timer that is used for clock
synchronization from the ACSEI server to the ACSEI client. It ranges from
0 to 1440 (in minutes), where value 0 disables the clock synchronization.
Description Use the acsei timer clock-sync command to set the synchronization
timer that is used for clock synchronization from the ACSEI server to the
ACSEI client.
Use the undo acsei timer clock-sync command to restore the default.
By default, the clock sychronization timer is set to five minutes.
Examples # Set the clock synchronization timer from the ACSEI server to the ACSEI
client to 20 minutes.
<SW5500G> system-view
System View: return to User View with Ctrl+Z.
[SW5500G] acsei server
[SW5500G-acsei-server] acsei timer clock-sync 20