3Com® Switch 5500G Open Services Networking Configuration and Command reference Guide

44 Chapter 6: ACSEI Server Configuration Commands
acsei timer monitor
Syntax acsei timer monitor seconds
undo acsei timer monitor
View ACSEI server view
Parameters seconds: Value of the monitoring timer that is used by the ACSEI server to
monitor the ACSEI clients. It ranges from 0 to 10 (in seconds), where 0
disables the ACSEI server from monitoring the ACSEI client.
Description Use the acsei timer monitor command to set the monitoring timer for
the ACSEI server to monitor the ACSEI client.
Use the undo acsei timer monitor command to restore the default.
By default, the monitoring timer is set to five seconds.
Examples # Set the monitor timer for the ACSEI server to monitor the ACSEI client
to six seconds.
<SW5500G> system-view
System View: return to User View with Ctrl+Z.
[SW5500G] acsei server
[SW5500G-acsei-server] acsei timer monitor 6
display acsei client info
Syntax display acsei client info [ client-id ]
View Any view
Parameters client-id: ID of an ACSEI client, in the range of 1 to 7.
Description Use the display acsei client info command to display the ACSEI client
information.