Access Controller xl Module Management and Configuration Guide 2005-03

Access Controller xl Module Overview
Term Use in this Manual
Integrated
Access
Manager 760wl
Combines the functionality of the ProCurve Access Controller 720wl and
the ProCurve Access Control Server 740wl in a single device.
Uplink Port The internal port that carries ACM traffic to and from the network. Must
be an untagged member of a non-client VLAN. This port is identified by
the slot ID where the module is installed, combined with ‘UP.’ For example,
CUP is the uplink port for an ACM installed in slot C of a 5300xl switch.
Uplink Network
Ports
Any 5300xl port that is a member of the uplink VLAN.
Uplink VLAN The VLAN containing the uplink port as an untagged member. By default,
this is the DEFAULT_VLAN on the 5300xl switch.
Access Controller xl Module Overview
The Access Controller xl Module adds new wireless security and access
control capabilities to the 5300xl switch. The module supplies identity-based
user access control to specific network services, wireless data privacy with
VPN services, and application persistence across subnet boundaries at the
edge of the network, where users connect. Centrally managed from the
ProCurve Secure Access Control Server 740wl or Integrated Access Manager
760wl, the Access Controller xl Module provides hassle-free access while
maintaining a high level of security.
3