Avaya Aura Session Border Controller powered by Acme Packet Installation and Getting Started Guide 2010-09

2-8
Hardware Installation
Set the Time on the System Platform
2. Set the date:
3. Set the time (which must be within a few minutes of the domain control-
ler’s time):
4. Set the timezone:
5. If you plan to activate Daylight Saving Time on the ONE-integrated
application, you must activate it on the HP zl switch:
6. Save the changes:
hostswitch(config)# write memory
Set the Time on the System Platform
To follow best practices, you should ensure that the HP AllianceONE Services
zl Module for Avaya Aura™ Session Border Controller is using the correct
time. At a minimum, we recommend you set the correct time on the HP zl
switch containing the Extended Services zl Module. A consistent, uniform
Syntax: clock set <DD/MM/YYYY>
Replace <DD/MM/YYYY> with the two-digit date, two-digit
month number, and four-digit year. For example, 05/24/2010
Syntax: clock set <HH:MM:SS>
Replace <HH:MM:SS> with the two-digit hour in the 24-hour
clock, two-digit minute, and two digit seconds. For
example, 10:09:35.
Syntax: time timezone <-780 - 840>
The switch calculates the time zone offset in minutes. For
example, to specify GMT +1, type 60.
Syntax: time daylight-time-rule < none | alaska | continental-us-and-canada |
middle-europe-and-portugal | southern-hemisphere | western-
europe |
user-defined>
Select the region that applies to you.