Field Replaceable Units (FRU) Guide, HP Advanced and Extended Services zl Modules 2011-11

13
Restoring Product Operation
The output from this command should show the correct product information
for the HP Advanced Services zl Module product and the ONE-App that you
installed previously.
From the Service OS prompt, reboot the module into the product OS with the
command:
:SvcOS)# boot ONE-app
At this point, normal operation should be restored.
zl Module Replacement
After installing your original HDD and CF into the replacement zl Module and
installing the module into the switch (as described earlier in this document),
depending on the ONE-App that you are using, you may have to re-install the
ONE-App activation licensing. See “One-App Activation” in Appendix D, “Soft
-
ware Components” of the HP Advanced Services zl Module Installation and
Getting Started Guide.
Once that licensing is complete, if necessary, normal operation should be
restored.