Field Replaceable Units (FRU) Guide, HP Advanced and Extended Services zl Modules 2011-11

17
Restoring Product Operation
:SvcOS)# show version details
The output from this command should show the correct product information
for the HP Advanced Services zl Module product and the ONE-App that you
installed previously.
From the Service OS prompt, reboot the module into the product OS with the
command:
:SvcOS)# boot ONE-app
At this point, normal operation should be restored.
zl Module Replacement
The pre-installed XenServer host runs as XenServer (free) for 30 days. After
30 days, you need to activate XenServer to continue to using the free
XenServer product, or you must configure Citrix licensing to use XenServer
Advanced editions. For more information on the XenServer editions, features,
and licensing, go to www.citrix.com/xenserver.
The XenServer host does not require HP licensing and activation.