Manualshelf

Getting Started Guide for Wireless EDGE Services xl Modules 2007-07

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
11121314151617181920
15
Getting Started
Change Password
It is recommended the administrator change the default Password.
1. Select Management > SNMP Access > V3. On this screen highlight the
User ID and select Edit.
The following screen appears after Edit is selected.
2. Enter the Old Password (default), and the New Password in the appro-
priate boxes. Select OK. The system will logoff.
3. To ’reload’, the administrator reboots the Web browser interface, and the
Login screen appears.