Getting Started Guide for Wireless EDGE Services xl Modules 2007-07

Getting Started

• Uptime - System Uptime is the current uptime for the system name

defined within the System Name field. Uptime is the cumulative time

since the network was last unavailable. This is not configurable by

the administrator.

• Software - The software field is a read-only field which displays the

current software version loaded on the Wireless Services Module.

• Radio Port Licenses -The license identifies the maximum number of

radio ports the Wireless Service Module can adopt.

• Management IP - The IP address of the Switch 5300 xl

• Wireless Services Modules - Slot location of the wireless services-

enabled Switch 5300xl

Chassis Information:

• Name - The Name is the chassis name for the Wireless Services

Module. Chassis names are used to differentiate the switch from the

system name that could possibly be used on more than one switch.

The Chassis Name (as well as all the information in the Chassis

Information field) should be unique.

• Management IP - The Management IP is the IP Address defined for the

Management IP unique to this chassis. The Management IP cannot be

a DNS name and must be an alpha-numeric value.

• Wireless Services Module - The Wireless Services Module field identi-

fies the slot the Wireless Services Module resides in within the 5300xl

Chassis. The sample screen indicates the module is in slot "F".

Reset Module:

• Reload - Click the Reload button to reboot (stop and start) the Wireless

Services Module.

• Shutdown - Click the Shutdown button to halt (stop) the Wireless

Services Module.

Apply:

•Click Apply to save the changes made within this screen. Navigating

away from this screen without clicking the Apply button loses the

changes made within the screen.

Revert

• Click the Revert button to undo any changes and revert back to the

last saved configuration.

This completes the basic setup.