Getting Started Guide for Wireless EDGE Services xl Modules 2007-07

19
Getting Started
Step 6 - Verify Radio Port adoption.
To verify that the radio ports have been adopted by the Module, select Network
Setup > WLAN > Configuration.
If some of the radio ports are not found on this screen, check the status of the
LEDs on the missing radio ports.
• If both the LEDs blink about once every 5 seconds, the Radio Port is
adopted and ready for use.
• If the amber light is continuously blinking, with the green light out.
the radio port is in the unadopted mode. In this case, please refer to
the appropriate Radio Port Getting Started Guide for further trouble
shooting information.