Getting Started Guide for Wireless EDGE Services xl Modules 2007-07

Getting Started

Step 7 - Configure the Module.

Configuration 1 - Normal Mode with one WLAN and three

radio ports.

1. Select Network Setup>WLAN Setup. This screen lists the WLANs.

However, only 16 are available in the Normal Mode.

2. Click and highlight Index 1, or WLAN1. Select Edit or double-click on the

Index line and an Edit screen appears. WLAN1 is specified in the catego-

ries of Configuration, Advanced, Authentication, and Encryption. For this case,

the following settings are specified:

• Configurations:

– SSID = Faculty1

– Description = Faculty

– VLAN ID = 1

– Encryption = WEP 64-bits