Manualshelf

Getting Started Guide for Wireless EDGE Services xl Modules 2007-07

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
21222324252627282930
22
Getting Started
5. With the line for Index 1 (WLAN1) still highlighted, select the Enable button.
This action causes the "x" in the Enabled column to change to a green check
mark, as shown below. Select Save for a non-volatile saving of the settings.
6. The Module, wireless services-enabled Switch 5300xl , and the radio ports
are now operational in the Normal Mode to the specified requirements.
Operation is confirmed via the Wireless Network screen of a wireless enabled
laptop PC, as show below:
Operation of each radio port is confirmed by observing the LEDs. In normal
operation both the LEDs blink about once every 5 seconds without any traffic.
With traffic, the LEDs blink more rapidly than the 5 second interval.