Getting Started Guide for Wireless EDGE Services xl Modules 2007-07

Loading New Module Software

To load new Module software, follow these steps:

1. Select Management>System Maint.>Software. This screen lists the

Primary and Secondary Module software resident on the Module system.

In the example below, the Primary software is WS.01.01.img. The screen

documents that this version of software was utilized for the current boot,

and will be used on the next boot. Note that the terms "Primary" and

"Secondary" are arbitrary such that the current version of software can be

stored in either image.

2. Locate the new Module software in a local TFTP or FTP folder.

3. Select the Upgrade Software button, and the Upgrade Screen appears.

Enter the appropriate information:

– Enter File: "WS.01.02.img"

– Select TFTP

– Enter IP address of PC where TFTP is located, e.g. 192.168.2.3

– Enter the path to the file on that server, or "/" if it is located in the

TFTP root

4. Select Do Upgrade.