H3C SECBLADELB-CMW520-R3204P17 - Release Notes

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module

Menu item Description

<4> File Control

Enter the file control submenu.

For details, refer to “File Control Submenu” on page 15.

<5> Modify BootWare Password Modify the BootWare password.

<6> Skip Current System

Configuration

Ignore the current system configuration.

The operation is one-off valid for the current boot. If you want

the SecBlade card to ignore the current configuration at the

next boot, you need to perform this operation.

<7> BootWare Operation Menu

Enter the BootWare operation submenu.

For details, refer to “BootWare Operation Submenu” on page

15.

<8> Clear Super Password

Clear the super user password.

The super user password is required in user level switching.

By default, no super user password is set.

The setting is valid only for the first reboot of the SecBlade

card and the super user password will be restored next time

the SecBlade card reboots.

<9> Storage Device Operation

Enter the storage device operation submenu to select

applications from a storage device to boot the SecBlade card.

<0> Reboot Reboot the SecBlade card.

Serial Submenu

Select 2 on the main menu to enter the serial submenu, where you can upgrade applications using

Xmodem. The serial submenu is as follows:

======================<SERIAL SUB-MENU>======================

|Note:the operating device is cfa0 |

| <1> Download Application Program To SDRAM And Run |

| <2> Update Main Application File |

| <3> Update Backup Application File |

| <4> Update Secure Application File |

| <5> Modify Serial Interface Parameter |

| <0> Exit To Main Menu |

=============================================================

Enter your choice(0-5):

Table 13 describes the serial submenu items.

Table 13 Serial submenu

Submenu item Description

<1> Download Application Program To

SDRAM And Run

Download an application to the SDRAM through the

serial interface and run the application.

<2> Update Main Application File Upgrade the main application file.

<3> Update Backup Application File Upgrade the backup application file.