7500 20Gbps VPN Firewall Card Manual-6P103

Manual Version: 6P103-20130916 BOM:

3123A0MP

Part number: 5998-3445

4 Installing and removing the LSU1FWCEA0 (JG372A) module

CAUTION:

• Wear a well-grounded ESD-preventive wrist strap before you install or remove the module.

• Do not touch the surface-mounted components directly with your hands when you install or remove the

module.

4.1

Installing the LSU1FWCEA0 (JG372A) module

1. Face the front panel of the switch.

2. Identify the slot to install the module, and remove the filler panel from the slot.

This manual uses slot 7 as an example.

3. Place the module vertically with the surface-mounted components facing left. Pull outward the

ejector levers and gently push the module in along the slot guide rails until the module is in close

contact with the backplane. (See callout 1 in Figure 3.)

4. Push the ejector levers inward. (See callout 2 in Figure 3.)

5. T

ighten the captive screws with a Phillips screwdriver to secure the module in the slot. (See callout

3 in Figure 3.)

Figure 3 Installing an LSU1FWCEA0 (JG372A) module

(1) Gently push the module in alon

the slot

uide rails until the module

is in close contact with the backplane.

(2) Push the ejector levers inward. (3) Tighten the captive screws with a Phillips screwdriver.

(4) Installation is finished.