HP Advanced Services zl Module with Citrix XenServer™ Platform Installation and Getting Started Guide

3-2
Troubleshooting
Quick Tips
This message appears when there are no other services installed in the
switch chassis. The XenServer host module is independent of the switch
services, so it is not listed.
This message appears when other services are installed in the switch. The
XenServer host module is independent of the switch services, so it is not
listed.
To check that your module is recognized by the switch, run the show
modules command from the switch CLI
The XenServer host module in switch slot C is listed.
Interpreting “hardware ready” status output
Issue: I want to see the status and version of the XenServer host module, but
the output of the show services <slot-ID> details command tells me that the
hardware is ready. What does this mean?
HP Switch# show services
Installed Services
Slot Index Description Name
E 1. Services zl Module services-module
E 2. Threat Management Services zl Module tms-module
HP Switch#
HP Switch# show modules
Status and Counters - Module Information
Chassis: E5406zl J8697A Serial Number: SG807SU3LT
Allow V1 Modules: Yes
Management Module: J8726A Serial Number: SG805AS03D Core Dump: YES
Core Mod
Slot Module Description Serial Number Status Dump Ver
---- -------------------------------------- -------------- -------- ----- ---
A HP J8702A 24p Gig-T zl Module Up NO 1
B HP J9478A 24p 10/100 PoE+ Module SG9453Z045 Up NO 1
C HP J9685A ONE Adv Svs zl Module SG0524P00V Up NO 1
E HP J9154A Services zl Module SG905GG060 Up NO 1
HP Switch#