HP Advanced Services zl Module with Citrix XenServer™ Platform Installation and Getting Started Guide

C-1

Hardware Components

Front Panel Buttons, LEDs, and Connectors

Hardware Components

Front Panel Buttons, LEDs, and

Connectors

This section describes the different buttons, LEDs, and connectors on the

front panel of a module:

■ Module Shutdown button—This button will shut down the module. It

should not be used for this purpose. Instead, use the hypervisor utilities

to gracefully shutdown the guest VMs and host.

Caution A hard shutdown can introduce the risk of hard disk drive (HDD) file

corruption.

Note also that the shutdown button can be enabled and disabled using a

CLI command. See “Device Disable” on page D-6.

■ 10/100/1000T Front Panel Port—This port provides a direct connec-

tion to the SBM for management, typically in troubleshooting situations.

Traffic is not routed through this port beyond the module.

■ USB Port—This port is used to attach a USB device, such as a flash drive.

The USB device is then available on the headless server.

Table C-1. Module LEDs

Module LED State Meaning

Module

Status

(green/

orange)

Solid orange

Solid green

Module is booting and going through POST and running the

Option ROM.

Hardware is ready