HP Advanced Services zl Module with Citrix XenServer™ Platform Installation and Getting Started Guide

E-5
Service OS Command-Line Reference
Service OS Operator Context Commands
Syntax: [no] page
This command is available from all contexts.
ping
Use this command to send an ICMP echo to a specified destination.
Syntax: ping < IP address >
Replace <IP address> with the IP address of the ping destination.
For example:
HP Switch(svcs-mod-<slot ID>:SvcOS)> ping 10.1.1.1
When you send ICMP echoes, the module displays the ping statistics to
describe the types of responses the router receives.
This command is available from all contexts.
show assigned-mac-address
This command shows the MAC addresses assigned to the module’s two
internal ports by the HP zl switch.
Syntax: show assigned-mac-address
You will primarily be interested in the MAC address for E2 (Internal Ethernet
Port 2) because this is the interface that your module will use to communicate
with rest of the network.