HP Advanced Services zl Module with Citrix XenServer™ Platform Installation and Getting Started Guide

E-8
Service OS Command-Line Reference
Service OS Manager Context Commands
Important In addition to those listed below, the Service OS also provides the following
commands which you must not use unless so directed by an HP networking
support agent:
■ delete
■ download
■ install
■ sync
■ uninstall
■ update
■ usb
boot
This command allows you to boot the XenServer.
Syntax: boot ONE-app
You will be prompted to continue.
device
This command enables or disables the USB slot or the shutdown button on
the front panel of the module.
Syntax: [no] device <USB | shutdown>
You can also enter the command without any options to see the current status
of the USB slot and shutdown button.
Syntax: device
exit
This command moves you back to the host HP zl switch CLI.
Syntax: exit
This command is available from all contexts.