HP Advanced Services zl Module with Citrix XenServer™ Platform Installation and Getting Started Guide

E-9
Service OS Command-Line Reference
Service OS Manager Context Commands
ip
This is the only configuration command available from the Service OS man-
ager context. It allows you to configure an IP address and default gateway on
the Service OS so that the module can communicate with an FTP server.
To configure the module’s IP address, enter the following command:
Syntax: [no] ip < dhcp | address <module IP address/prefix length>>
Use the dhcp option to configure the module to receive a dynamic IP address.
Replace <module IP address/prefix length> with the module’s IP address and the
prefix length for the subnet.
To configure the module’s default gateway, enter the following command:
Syntax: [no] ip default-gateway <gateway IP address> >
Replace <gateway IP address> with the IP address the module’s default
gateway.
page
This command enables and disables page mode. In page mode, the terminal
output will pause when it fills the screen and wait for a keystroke such as
space
or [Ctrl][C].
Syntax: [no] page
This command is available from all contexts.
licenses
This command manages licences for the module.
Syntax: licenses <hardware-id | install | unistall>
To show the module’s hardware ID for a license installation request, enter the
following command:
Syntax: licenses hardware-id activation
To install a license on the module, enter the following command:
Syntax: licenses install activation <KEY>