HP Advanced Services zl Module with Citrix XenServer™ Platform Installation and Getting Started Guide

E-10
Service OS Command-Line Reference
Service OS Manager Context Commands
To uninstall a license on the module, enter the following command:
Syntax: licenses unistall
ping
Use this command to send an ICMP echo to a specified destination.
Syntax: ping < IP address >
Replace <IP address> with the IP address of the ping destination.
For example:
HP Switch(svcs-mod-<slot ID>SvcOS)# ping 10.1.1.1
When you send ICMP echoes, the module displays the ping statistics to
describe the types of responses the router receives.
This command is available from all contexts.
show assigned-mac-address
This command shows the MAC addresses assigned to the module’s two
internal ports by the HP zl switch.
Syntax: show assigned-mac-address
You will primarily be interested in the MAC address for E2 (Internal Ethernet
Port 2) because this is the interface that your module will use to communicate
with rest of the network.
show chassis
This command shows the hostname and IP address of the host chassis as well
as the slot in which the module resides.
Syntax: show chassis
show images
This command shows the images in the images repository.
Syntax: show images [details]