HP Advanced Services zl Module with Microsoft® Windows Server® 2008 R2 Installation and Getting Started Guide

E-9
Command-Line Reference
Operator Context Commands
The following sections describe commands that are available from the Oper-
ator context of the module’s ONE-App OS.
exit
The exit command moves you back one context level. In the manager EXEC
context level, this command returns you to the HP zl switch CLI.
Syntax: exit
This command is available from all contexts.
page
This command enables and disables page mode. In page mode, the terminal
output will pause when it fills the screen and wait for a keystroke such as
[
Spacebar] or [Ctrl][C].
This command is available from all contexts.
Syntax: [no] page
show firewall
This command displays the status of the Windows firewall, whether on or off.
Syntax: show firewall
This command is available from all contexts.
show interfaces
This commands shows the three module interfaces and whether they are
enabled or not:
■ Internal Ethernet Port 1
■ Internal Ethernet Port 2
■ Management port
Syntax: show interfaces
This command is available from all contexts.