HP Advanced Services zl Module with Microsoft® Windows Server® 2008 R2 Installation and Getting Started Guide

E-10
Command-Line Reference
Operator Context Commands
show ip
This command shows IP information for the three module interfaces:
■ Internal Ethernet Port 1
■ Internal Ethernet Port 2
■ Management Port
The IP information includes the interface’s DHCP setting and status, as well
as the interface’s IP address, subnet mask, default gateway, gateway metric,
DNS servers, and WINS servers. The command also outputs the module’s
hostname.
Note The Management port is not functional for beta implementations.
Syntax: show ip
This command is available from all contexts.
show remote-desktop
This command displays the status of the Remote Desktop, whether enabled
or disabled. When enabled, you can access the module via Remote Desktop
Protocol (RDP) and manage the device much like any Windows Server
2008 R2.
Syntax: show remote-desktop
This command is available from all contexts.
show tech
This command outputs all available system information, including the running
configuration and logs. The command might take several minutes to execute.
(You can cancel it by pressing
[Ctrl][C].)
Syntax: show tech
This command is available from all contexts.