HP Advanced Services zl Module with Microsoft® Windows Server® 2008 R2 Installation and Getting Started Guide

E-11
Command-Line Reference
Manager EXEC Context Commands
show version
This command displays the version of the module’s ONE-App software. This
will include a version identifier for the HP software and the media gateway
version.
Syntax: show version
This command is available from all contexts.
Manager EXEC Context Commands
The Manager EXEC context features a limited number of commands that
allow you to see information about the module or to restart or shutdown the
module.
To access the Manager EXEC context, enter the manager context of the CLI
of the HP zl switch in which the module is installed. Then enter the following
command:
Services Index and Name
To enter the CLI for the module’s ONE-App OS, you must either specify the
module’s service name or index number. The service name for this module is
always hp-svcs-std.
The product index number is assigned to the module by the HP zl switch. This
index number varies, depending on whether or not any HP ONE Services zl
Modules are also installed in the host switch. The ONE Services zl Module is
a hardware platform that supports multiple products. (For a list of other
products that run on the ONE Services zl Module, visit the HP Web site at
www.hp.com/go/procurve.)
Syntax:
services <slot ID> < <index> | name hp-svcs-std >
Moves you to an OS context on the module.
Replace <slot ID> with the letter for the lower chassis slot
in which the module is installed.
Replace <index> with the index assigned to the module. If
you do not know this index, see the section below.