HP Advanced Services zl Module with Microsoft® Windows Server® 2008 R2 Installation and Getting Started Guide

E-24
Command-Line Reference
Interface Configuration Mode
show firewall
This command displays the status of the Windows firewall, whether on or off.
Syntax: show firewall
This command is available from all contexts.
show interfaces
This commands shows the three module interfaces and whether they are
enabled or not:
■ Internal Ethernet Port 1
■ Internal Ethernet Port 2
■ Management port
Syntax: show interfaces
This command is available from all contexts.
show ip
This command shows IP information for the three module interfaces:
■ Internal Ethernet Port 1
■ Internal Ethernet Port 2
■ Management Port
The IP information includes the interface’s DHCP setting and status, as well
as the interface’s IP address, subnet mask, default gateway, gateway metric,
DNS servers, and WINS servers. The command also outputs the module’s
hostname.
Syntax: show ip
This command is available from all contexts.