HP Advanced Services zl Module with Microsoft® Windows Server® 2008 R2 Installation and Getting Started Guide

E-25
Command-Line Reference
Interface Configuration Mode
show remote-desktop
This command displays the status of the Remote Desktop, whether enabled
or disabled. When enabled, you can access the module via Remote Desktop
Protocol (RDP) and manage the device much like any Windows Server 2008
R2.
Syntax: show remote-desktop
This command is available from all contexts.
show tech
This command outputs all available system information, including the running
configuration and logs. The command might take several minutes to execute.
(You can cancel it by pressing
[Ctrl][C].)
Syntax: show tech
This command is available from all contexts.
show version
This command displays the version of the module’s ONE-App software. This
will include a version identifier for the HP software and the media gateway
version.
Syntax: show version
This command is available from all contexts.
shutdown
This command shuts down the module gracefully. You will be exited to the
host HP zl switch CLI. (To restart the module, you can enter services <slot ID>
reload.)
Syntax: shutdown