HP Advanced Services zl Module with Microsoft® Windows Server® 2008 R2 Installation and Getting Started Guide

E-30
Command-Line Reference
Services OS Manager Context Commands
The sections below describe commands that you can use to view settings and
boot to the ONE-app software.
The Services OS also provides the following commands, which you must not
use unless so directed by an HP networking support agent:
■ delete
■ download
■ install
■ sdk
■ sync
■ uninstall
■ update
■ usb
boot
This command allows you to boot the module’s different operating systems.
You can boot the Services OS or the ONE-App OS.
To boot an OS, enter the following command:
Syntax: boot [ ServiceOS | One-app]
The module will tell you that you are changing operating systems and that the
module will reboot. You will be prompted to continue.
If you do not select an OS, the module will simple be rebooted in the
current OS.
device
This command enables or disables the USB slot or the shutdown button on
the front panel of the module.
Syntax: [no] device <USB | shutdown>
You can also enter the command without any options to see the current status
of the USB slot and shutdown button.
Syntax: device