Manualshelf

HP Advanced Services zl Module with Microsoft® Windows Server® 2008 R2 Installation and Getting Started Guide

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
31323334353637383940
2-16
Getting Started
Access the Module using Remote Desktop Protocol (RDP)
f. If you want to set the DNS server addresses manually, select Use the
following DNS server addresses and specify the addresses.
g. Click OK.
h. Click Close.
4. If you want, you can change the IP address on the module’s management
interface. Again, follow the standard Windows procedure.
Important If you change the IP address of the interface on which you are currently
connected, you will lose your RDP session. You must access the module again
at the new IP address.