HP Advanced Services zl Module with Microsoft® Windows Server® 2008 R2 Installation and Getting Started Guide

3-9
Management
Special Administration Console (SAC)
2. Access the command prompt channel:
SAC> ch -si <channel number>
For example:
SAC> ch -si 1
You should see that you are entering the command prompt channel.
3. Press
[Spacebar].
4. When prompted, log in with your domain or local Administrator creden-
tials.
5. You can then enter Windows command line commands.
6. To return to the SAC, type exit.
7. You should see that you are entering the SAC channel.
Figure 3-7. SAC—SAC Channel
8. Press
[Spacebar].
Recovery Menu
The module supports a Recovery Menu that enables you to revert to the factory
image. (See also “Restoring the Module to the Factory Image” on page 4-4.)