HP Advanced Services zl Module with Microsoft® Windows Server® 2008 R2 Installation and Getting Started Guide

3-11
Management
SNMP MIBs
5. As the module reboots, messages will be displayed. You will see the Safe
Mode options.
Figure 3-8. Safe Mode Options
6. Use the arrow keys to select an option and press
[Enter] to confirm.
These options remain for 30 seconds. If you do nothing, the module boots
normally.
After the module boots up, you will see the SAC prompt.
SNMP MIBs
Verify that your SNMP solution has the correct MIBs for this module, which
include:
 Microsoft/Windows OS MIBs
 Intel NIC MIBs
The sections below explain where you can obtain the appropriate MIBs.
Microsoft/Windows OS MIBs
You can find the Microsoft Windows OS MIBs on the SBM by accessing it using
RDP. The MIBs are stored in the C:\Windows\System32 directory. You can
identify them by the .mib file extension.