HP Advanced Services zl Module with Microsoft® Windows Server® 2008 R2 Planning and Design Guide

2-9
Solution 1: WAN Optimization and Survivability
Solution Implementation
In this example, the module is installed in slot C, and the server belongs
in VLAN 5:
hostzlswitch(config)# vlan 5 untagged c2
3. Move to the module’s CLI and set the module’s IP address.
a. View the Services zl Modules installed in the switch:
hostzlswitch(config)# show services
You should see output similar to the following. Note the slot letter and
index number for the service described as Branch Core Svcs Mod-
ule-Standard. For example, in Figure 2-3 you can see that the index
number is 2.
Figure 2-3. HP zl Switch CLI—show services Output
b. Access the module’s application OS:
For example, enter:
hostzlswitch# services c 2
You can alternatively enter:
hostzlswitch(config)# services <slot> name hp-svcs-std
c. Access the Windows context:
hostzlswitch(hp-svcs-std-<slot>)# windows SBMAdmin
Syntax: services <slot ID> <index number>
Replace <slot ID> with the ID of the slot in which the module
is installed.
Replace <index number> with the index number that you just
noted for the service.
Syntax: services <slot ID> name hp-svcs-std
Replace <slot ID> with the ID of the slot in which the module
is installed.