HP Advanced Services zl Module with Microsoft® Windows Server® 2008 R2 Planning and Design Guide

3-11
Solution 2: Survivable Wireless Networking
Solution Implementation
You can alternatively enter:
hostzlswitch(config)# services <slot> name hp-svcs-std
c. Access the Windows context:
hostzlswitch(hp-svcs-std-<slot>)# windows SBMAdmin
Enter P@ssw0rd and then set the new password, following standard
Windows complexity requirements.
Note The a has been replace with @ and the o with the numeral 0.
d. Move to the interface 2 context:
hostzlswitch(hp-svcs-std-<slot>:win)# interface 2
e. Set the IP address:
hostzlswitch(hp-svcs-std-<slot>:eth-2)# ip address <IP
address> <subnet mask>
For this example:
hostzlswitch(hp-svcs-std-E:eth-2)# ip address 10.29.4.30
255.255.255.0
f. Set the default gateway address:
hostzlswitch(hp-svcs-std-<slot>:eth-2)# ip default-gate-
way <router IP address>
For this example:
hostzlswitch(hp-svcs-std-E:eth-2)# ip default-gateway
10.29.4.1
g. Set the DNS server IP address:
hostzlswitch(hp-svcs-std-<slot>:eth-2)# ip dns server-
address priority [1 |2] <IP address>
For this example:
hostzlswitch(hp-svcs-std-E:eth-2)# ip dns server-address
priority 1 10.29.1.30
Syntax: services <slot ID> name hp-svcs-std
Replace <slot ID> with the ID of the slot in which the module
is installed.