HP Advanced Services zl Module with Microsoft® Windows Server® 2008 R2 Planning and Design Guide

4-9
Solution 3: Survivable Communications
Solution Implementation
Figure 4-3. HP zl Switch CLI—show services Output
b. Access the module’s application OS:
For example, enter:
hostzlswitch# services c 2
You can alternatively enter:
hostzlswitch(config)# services <slot> name hp-svcs-std
c. Access the Windows context:
hostzlswitch(hp-svcs-std-<slot>)# windows SBMAdmin
Enter P@ssw0rd and then set the new password, following standard
Windows complexity requirements.
Note The a has been replace with @ and the o with the numeral 0.
d. Move to the interface 2 context:
hostzlswitch(hp-svcs-std-<slot>:win)# interface 2
e. Set the IP address:
hostzlswitch(hp-svcs-std-<slot>:eth-2)# ip address <IP
address> <subnet mask>
Syntax: services <slot ID> <index number>
Replace <slot ID> with the ID of the slot in which the module
is installed.
Replace <index number> with the index number that you just
noted for the service.
Syntax: services <slot ID> name hp-svcs-std
Replace <slot ID> with the ID of the slot in which the module
is installed.