HP Advanced Services zl Module with Microsoft® Windows Server® 2008 R2 Planning and Design Guide

4-11
Solution 3: Survivable Communications
Solution Implementation
HP SBM
Refer to the HP Survivable Branch Communication zl Module (SBM) pow-
ered by Microsoft Lync© Installation and Getting Started Guide for instruc-
tions on installing this module in the HP zl switch and getting the module up
and running. In this example solution, the module’s internal interface 2 is
placed in VLAN 41 (untagged), and the module is assigned IP address 10.4.1.20/
24.
After you install the SBM and determine its IP address, you can access its
Setup Wizard. The Setup Wizard will guide you through the configuration.
Remember to specify the IP address of the Windows Server 2008 R2 that is
running on the HP zl module for the SBM’s primary or secondary DNS server
(10.4.2.30 in this example). Except for that requirement, you can use any
settings required by your environment.
Refer to the HP Survivable Branch Communication zl Module (SBM) pow-
ered by Microsoft Lync© Administrator’s Guide for more help.