HP Advanced Services zl Module with Microsoft® Windows Server® 2008 R2 Planning and Design Guide

5-8
Solution 4: Survivable Authentication and Authorization
Solution Implementation
You should see output similar to the following. Note the slot letter and
index number for the service described as Branch Core Svcs Mod-
ule-Standard. For example, in Figure 5-3 you can see that the index
number is 2.
Figure 5-3. HP zl Switch CLI—show services Output
b. Access the module’s application OS:
For example, enter:
hostzlswitch# services c 2
You can alternatively enter:
hostzlswitch(config)# services <slot> name hp-svcs-std
c. Access the Windows context:
hostzlswitch(hp-svcs-std-<slot>)# windows SBMAdmin
Enter P@ssw0rd and then set the new password, following standard
Windows complexity requirements.
Note The a has been replace with @ and the o with the numeral 0.
d. Move to the interface 2 context:
hostzlswitch(hp-svcs-std-<slot>:win)# interface 2
e. Set the IP address:
Syntax: services <slot ID> <index number>
Replace <slot ID> with the ID of the slot in which the module
is installed.
Replace <index number> with the index number that you just
noted for the service.
Syntax: services <slot ID> name hp-svcs-std
Replace <slot ID> with the ID of the slot in which the module
is installed.