HP ProCurve 700wl Series - Secure Access Configuration Guide for Wireless Clients (April 2005) Part One: Browser-Based Logons

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module

a. To create a new RADIUS client on the Enterprise Server, open IAS (Start

Æ Administrative Tools Æ Internet Authentication Service). Right click on

RADIUS Clients and select New RADIUS Client.

Figure 3.1 – New RADIUS Client

b. Configure a Friendly name (740wl) and enter the IP address of the

Access Control Server (10.24.3.50). Click Next.

© Copyright 2005 Hewlett-Packard Company, LP. 29