HP ProCurve 700wl Series - Secure Access Configuration Guide for Wireless Clients (April 2005) Part One: Browser-Based Logons

Figure 3.19 – System Authentication Policy

c. On the ACS, browse to Status -> Client Status and click Refresh User

Rights Now.

4) On the ACS, configure the Authenticated Access Policy to allow clients to

use Real IP addresses (via DHCP).

a. Refer to Configuring Scenario 2 to configure the Authenticated Access

Policy to allow clients to use Real IP addresses.

5) On the AP 420, configure Static WEP wireless parameters.

a. Refer to Configuring Scenario 1 to configure the AP 420 for Static WEP.

6) Connect Windows 2000 Client, logon using browser-based logon and

verify authentication.

a. Connect the wireless Windows 2000 client to the AP 420 using Static WEP.

b. Open a Web browser on the client. The 700wl logon page will appear.

(You may need to configure the browser to accept all cookies).

c. Enter the username (juser) and password (password) and click the

Logon User button.