Manualshelf

HP ProCurve 700wl Series - Secure Access Configuration Guide for Wireless Clients (April 2005) Part One: Browser-Based Logons

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
12345678910
b) Browse to Rights -> Identity Profiles and Select Network Equipment. Click
on New Equipment, input a descriptive name (AP 420-1) and paste the MAC
address into the MAC Address field. Select the Access Point Identify
Profile and save changes.
Figure C – New Equipment Page
c) Browse to Status -> Client Status and click Refresh User Rights Now. The AP
420 is now recognized by the ACS as “Network Equipment”.
© Copyright 2005 Hewlett-Packard Company, LP. 7