HP ProCurve Switch /Wireless - Interoperability between ProCurve WESM zl and Polycom-SpectraLink phones

Interoperability between ProCurve WESM zl and Polycom-SpectraLink phones

HP ProCurve Networking

8. Upgrading SpectraLink firmware

Firmware versions of the switches used for this application note are as follows:

• K.13.09 for ProCurve switch 5406zl

• WT.01.15 for ProCurve WESM zl

Firmware version of the SpectraLink wireless phones is 89.135 or higher.

Firmware version of SVP Server is 17x.034 or higher.

8.1 Upgrade NetLink SVP Server

At start-up, the NetLink SVP Server uses TFTP to check the software version it is running against the version in the

TFTP location. If there is a discrepancy, the NetLink SVP Server will download the version in the TFTP location.

Software versions that are running on the system components can be displayed via the System Status screen.

To upgrade the NetLink SVP Server:

1. Download the NetLink SVP Server software (version 17x.034 or higher), available at:

http://www.polycom.com/usa/en/support/voice/wi-fi/spectralink_8000_svp_server.html

2. Transferred the downloaded file to the TFTP location on the LAN to update the code used by the NetLink SVP

Server.

3. Once correct files are on the TFTP location, go to the SVP Server SVP-II Configuration menu and select the

option Reset System. This resets the SVP Server.

4. After the upgrade, Once upgraded, go to the Network Configuration menu and change the option SVP-II TFTP

Download Master back to None.

5. Then reset the SVP Server.

6. After resetting, ensure the following conditions are met:

o The SVP Server (including an H.323 gatekeeper) should be active and fully operational.

o No alarm should be displayed under System Status Menu / Error Status.

o Under the SVP-II configuration menu, the parameters System Locked and Maintenance Locked

should both indicate N.

8.2 Upgrade SpectraLink wireless telephones

To upgrade firmware in SpectraLink e340, h340 or i640 model telephones:

1. Download new firmware for the wireless phones from:

http://www.polycom.com/usa/en/support/voice/wi-fi/spectralink_i640_wireless.html

2. Extract all files and copy them to the TFTP server. The phones will automatically check the TFTP server for

upgrades.