HP ProCurve Switch /Wireless - Interoperability between ProCurve WESM zl and Polycom-SpectraLink phones

Interoperability between ProCurve WESM zl and Polycom-SpectraLink phones
HP ProCurve Networking
4
4. Secure wireless WPA2-PSK encryption
Polycom-SpectraLink wireless phones support the following encryption options:
• WEP
• WPA-PSK
• WPA2-PSK
To configure the ProCurve WESM for secure wireless encryption via WPA2-PSK:
1. On the wireless edge services module, go to Network Setup > WLAN Setup and create a new WLAN called
voice.
2. Configure this WLAN as follows:
o SSID: voice
o VLAN ID: The VLAN you want to be assigned to the phone. This VLAN must be tagged on the WESM
uplink from the switch menu. (For details, refer to Application Note AN-M1, or to the Wireless Services
Module Administrator Guide).
o Authentication: No Authentication.
o Encryption: Enable both WPA/WPA2 TKIP and WPA2 AES.