HP ProCurve Switch /Wireless - Interoperability between ProCurve WESM zl and Polycom-SpectraLink phones

Interoperability between ProCurve WESM zl and Polycom-SpectraLink phones
HP ProCurve Networking
5
3. Click the Config button, and configure the pre-shared key as follows.
o ASCII passphrase: procurve
o Enable all three Fast Roaming options (PMK caching, Opportunistic key caching, Pre-authentication).
4. Click OK to return to the main Edit window.
5. In the main Edit window, under Advanced, select Closed System, then click OK.
6. Finally, to enable the new WLAN, at the bottom of the WLAN list window click the Enable button.
5. SpectraLink VoWLAN configuration
This section explains how to configure the Polycom-SpectraLink Voice over Wireless LAN (VoWLAN).
5.1 Configure the SpectraLink SVP Server
You have two possibilities for integrating a SpectraLink SVP server:
• As an SVP that integrates with a 3rd-party IPBX (e.g. Mitel or Cisco)
• Or as a standalone gatekeeper SVP
The following procedures are for a standalone gatekeeper SVP integration.
5.1.1 Connect to the SpectraLink SVP Server via the serial port:
1. Using a DB-9 female null-modem cable, connect the NetLink SVP Server to the serial port of a terminal or PC.
2. On the PC, run a terminal emulation program (such as HyperTerminal™) or use a VT-100 terminal with the
following configuration:
o Bits per second: 9600
o Data bits: 8
o Parity: None
o Stop bits: 1
o Flow control: None
3. Press Enter to display the NetLink SVP Server login screen.