HP ProCurve Switch / Wireless - Using 802.11e and WMM on the ProCurve Wireless Edge Services Module

Using 802.11e and WMM on the ProCurve Wireless Edge Services Module

HP ProCurve Networking

3.1 Activate WMM

To activate WMM for a WLAN:

1. Go to the web interface of the Wireless Edge Services Module. In the Network Setup > WLAN Setup > Edit

screen, go to the Advanced section and choose Automatic/WMM:

2. Click OK to accept Automatic/WMM as the Access Category. Wireless traffic is placed in the four queues

according to its 802.1p priority (default) or DSCP value. The default mapping is as follows:

Queue

number

AC 802.1p priority DSCP

1 Background 1, 2 8–23

2 Best effort 0, 3 0–7, 24–31

3 Video 4, 5 32–47

4 Voice 6, 7 48–63