HP ProCurve Switch / Wireless - Using 802.11e and WMM on the ProCurve Wireless Edge Services Module

Using 802.11e and WMM on the ProCurve Wireless Edge Services Module
HP ProCurve Networking
5
3.3 Modify WLAN prioritization mode and AC queue parameters
You can also modify the prioritization mode and AC queue parameters for the WLAN.
For instance, by default the prioritization mode is 802.1p (Layer-2 priority) but you can also set it to DSCP. To modify
this setting:
1. From the Network Setup > WLAN Setup menu click on the WMM tab to display the list of access categories
for each WLAN. For example: