HP ProCurve Switches / Wireless - Interoperability between ProCurve WESM zl and Cisco Unified Wireless IP Phone 7921G

Interoperability between ProCurve WESM zl and Cisco Unified Wireless IP Phone 7921G
HP ProCurve Networking
4
4. Secure wireless WPA2-PSK encryption
The Cisco Unified Wireless IP Phone 7921G supports the following encryption options:
• WEP
• WPA1-PSK
• WPA2-PSK
• 802.1X with the following EAP protocols: LEAP, PEAP, EAP-FAST, EAP-TLS, and PEAP
This application note describes the configuration of WPA2-PSK encryption.
4.1 Configure the ProCurve WESM
To configure the ProCurve WESM for secure wireless encryption via WPA2-PSK:
1. On the wireless edge services module, go to Network Setup > WLAN Setup and create a new WLAN called
voice.
2. Configure this WLAN as follows:
o SSID: voice
o VLAN ID: The VLAN you want to be assigned to the phone. This VLAN must be tagged on the WESM
uplink from the switch menu. (For details, refer to Application Note AN-M1, or to the Wireless Services
Module Administrator Guide).
o Authentication: No Authentication.
o Encryption: Enable both WPA/WPA2 TKIP and WPA2 AES.