HP ProCurve Switches / Wireless - Interoperability between ProCurve WESM zl and Cisco Unified Wireless IP Phone 7921G

Interoperability between ProCurve WESM zl and Cisco Unified Wireless IP Phone 7921G
HP ProCurve Networking
5
3. Click the Config button, and configure the pre-shared key as follows.
o ASCII passphrase: procurve
o Enable all three Fast Roaming options (PMK Caching, Opportunistic Key Caching, Pre-
Authentication).
4. Click OK to return to the main Edit window.
5. In the main Edit window, under Advanced, select Closed System, then click OK.
6. Finally, to enable the new WLAN, at the bottom of the WLAN list window click the Enable button.
4.2 Configure the Cisco wireless IP phone
To configure the Cisco Wireless IP Phone 7921G:
1. From the phone main menu, press the bottom arrow to enter the SETTINGS menu.
2. Then choose 2 for Network Profiles.
3. Select Profile 1 and press Change.
4. Press 1 to enter Profile Name. Enter a new profile name, WPA2. Then press Options and 1 to save the profile
name.
Note: If at any time you obtain the Settings locked message, press **# to unlock the screen.
5. Return to the Network Profiles menu and choose 2. Network Configuration.
6. If you want to assign a static IP address, set DHCP (option 4) to No, and assign the IP address, subnet mask
and gateway.
-or-
Use DHCP with the following options:
o Option 1: Subnet Mask
o Option 3: Router IP Address
o Option 6: DNS Server(s)
o Option 15: DNS Domain Name
o Option 66: TFTP Server
7. Press Options and 1 to save the network profile configuration.
8. Return to the Profile menu and choose 3. WLAN Configuration.