HP ProCurve Switches / Wireless - Interoperability between the Aastra Wireless Phone 312 and ProCurve Wireless Services

Interoperability between the Aastra Wireless Phone 312 and ProCurve Wireless Services
HP ProCurve Networking
4
4.1 Configure encryption on the WESM
To configure the Wireless Edge Services Module for encryption:
1. On the Wireless Edge Services Module, go to Network Setup > WLAN Setup and create a new WLAN called
voice.
2. Configure this WLAN as follows:
o SSID: voice
o VLAN ID: The VLAN to which you want the phone to be assigned. You must use the switch menu to
tag this phone on the WESM uplink. (For details, refer to application note AN-M1, Extend your wired
network to wireless, or to the Wireless Services Module Administrator Guide).
o Authentication: No Authentication.
o Encryption: WPA/WPA2-TKIP and WPA2-AES.