HP ProCurve Switches / Wireless - Interoperability between the Aastra Wireless Phone 312 and ProCurve Wireless Services

Interoperability between the Aastra Wireless Phone 312 and ProCurve Wireless Services
HP ProCurve Networking
5
3. Click on the Config button. You see a window for configuring the pre-shared key. Set the parameters as
follows:
o ASCII passphrase: procurve
o Check the boxes to enable all three Fast Roaming options: PMK Caching, Opportunistic Key Caching
and Pre-Authentication.
4. Click OK to return to the main window.
5. On the main window Advanced section, check the Closed System box to enable it.
6. Finally, to enable the new WLAN, click the Enable button at the bottom of the WLAN list screen.
4.2 Configure the Aastra wireless SIP phone 312 for encryption
To configure the Aastra Phone 312:
1. From the main screen of the phone choose Menu, then use the arrows to select System.
2. In the System menu choose Network.
3. From the Network menu choose Profiles. Then choose Options | New to select a new profile.
4. Configure the new profile as follows:
o Profile Name: Aastra VOIP
o Region: Use the arrows to select your region (e.g., Europe)
o SSID: voice
o Security: Use the arrows to select WPA2-PSK
o WPA key: procurve
o IP address: Static, or use DHCP
5. If prompted for a PIN code, enter 22222 (the default PIN).