HP ProCurve Switches / Wireless - Interoperability between the Aastra Wireless Phone 312 and ProCurve Wireless Services

Interoperability between the Aastra Wireless Phone 312 and ProCurve Wireless Services
HP ProCurve Networking
6
6. If you use DHCP assignment, configure the following options on the DHCP server:
Note: Illustration from Aastra Phone 312 User Guide.
7. Once the profile is configured click OK, then click Back as many times as needed to go back to the Main
screen. If the profile is correctly configured, in the phone display’s upper left corner you will see a small icon
showing the signal strength.
8. To test for connectivity, ping from the phone to an IP address on the network. Go to Menu | System | Network
| Tools | Ping.
9. Enter the IP address you want to ping and click OK. You should obtain a window showing the different ping
attempts, the ping statistics ( tx, rx, % loss), and the average response time.
10. On the WESM, you can now see the phone in Device Association > Wireless stations. You should see the
MAC address, IP address, WLAN, VLAN, and Radio Index. For example:
11. On the Aastra Phone 312 you can view similar info in System | Network | Info.